Can You Name All of These Electrician Tools?

Estimated Completion Time
3 min
Can You Name All of These Electrician Tools?
Image: Shutterstock

About This Quiz

Everyone thinks they are an electrician, right up until they try to turn on the living room lights only to hear the garbage disposal begin churning. How well do you think you know the tools of an electrician? From a screwdriver to a reciprocating saw, these tools prove that being an electrician is more than switches and wires. They need to combine the role of electrical expert with that of woodworker, drywaller and sometimes even plumber.

We'll stick to the basics here. Do you know the difference between a wire stripper and needle nose pliers? Do you think you can use them for the same task? It might not be as safe as you think.! Channel locks and conduit benders can come in handy when you need one, but do you think you'd be able to identify one of these tools? You probably know what a screwdriver looks like and doubtless even a set of Allen keys - but, how well will you do with sizes and shapes of each? Do you think a flat-head screwdriver can be used as a chisel, scraper or pry bar? That type of thinking is can land you in the hospital. 

Curious about being an electrician? Take this quiz to see if you're well on your way... or if you should just hire someone. 

Needle Nose Pliers
shutterstock
Can you name this electrician tool?
needle nose pliers
Let's face it -- electrical work often involves handling small wires and tiny fasteners. Needle nose pliers make it easy to hold onto these small objects while you work, and are perfect for reaching into tight spaces where your fingers just won't fit.
circuit finder
nut driver
tool bag

Advertisement

Flathead Screwdriver
shutterstock
Can you name this electrician tool?
wire stripper
Flathead screwdriver
A flathead screwdriver is a must-have in any trade. It's necessary for removing or replacing old flat-head screws, and can also be used for other jobs, like prying a lid off a can or jar. Electricians need screwdrivers in a variety of sizes for different fasteners.
soldering iron
measuring tape

Advertisement

Wire Strippers
Shutterstock
Can you name this electrician tool?
hard hat
flashlight
drill
wire stripper
Wire strippers remove insulation without damaging wire. Sure, you could scrape the insulation of with your knife, but you're much more likely to nick the wire -- or your finger.

Advertisement

Tape Measure
shutterstock
Can you name this electrician tool?
safety glasses
measuring tape
The rule of measure twice, cut once holds true for electricians as much as it does for carpenters. Use your measuring tape to install outlets, receptacles and switches at the proper height, and to align fixtures and other devices.
soldering iron
chalk line

Advertisement

Power Drill
n/a
Can you name this electrician tool?
hacksaw
stubby screwdriver
drill
A drill is a must-have for any person working in the trades. Electricians use drills to quickly install screws in light fixtures, junction boxes, outlets and receptacles.
tick tester

Advertisement

Reciprocating Saw
n/a
Can you name this electrician tool?
insulated screwdriver bit holder
tick tester
reciprocating saw
A reciprocating saw, also known as a Sawzall after one popular brand, is ideal for cutting into drywall or performing basic demo work. Electricians would use this tool to cut openings for outlets and other electrical devices in walls and ceilings.
conduit scoring tool

Advertisement

Hammer
n/a
Can you name this electrician tool?
circuit finder
drill
hammer
A claw hammer offers simple utility, and can be used for prying, removing nails and hammering nails in place -- such as fastening a junction box to wood-framed walls.
electrical tape

Advertisement

Pliers
Shutterstock
Can you name this electrician tool?
channel locks
Also known as slip-joint pliers, channel locks are wrenches with adjustable, angled jaws. One jaw contains a track, allowing the other jaw to lock into place. This tool is useful for tightening or removing nuts and bolts in a variety of sizes.
hacksaw
hole saw
hammer drill

Advertisement

Allan Wrench
shutterstock
Can you name this electrician tool?
stud finder
conduit scoring tool
Allen wrench
Allen wrenches, or hex keys, have hexagonal ends to insert and remove specialty screws with ease. These keys come in sets so you'll always have the size you need for the job.
hole saw

Advertisement

Side-cutting Pliers
shutterstock
Can you name this electrician tool?
side cutting pliers
Side-cutting pliers have angled cutting edges that form a V-shape. They are primarily used to cut wire. Electricians should invest in insulated models to reduce the risk of electric shock while working.
reciprocating saw
hart hat
conduit reamer

Advertisement

Phillips screwdriver
shutterstock
Can you name this electrician tool?
reciprocating saw
Phillips screwdriver
While flathead screws were commonly used several decades ago, most screws used today have a cross-shaped head, known as a Phillips head. To remove or install these screws, you'll need a set of Phillips head screwdrivers. Look for magnetic ones that help prevent dropped screws, and consider tools with insulted handles to reduce the risk of shock.
hammer
Allen wrench

Advertisement

wire fishing pole
YouTube
Can you name this electrician tool?
tick tester
level
flashlight
wire fishing pole
Electricians may have to run wire through walls, attics, ceilings or conduit. A fishing pole is a fiberglass pole with a hook at the end that makes this job much easier because it's much more rigid and easy to work with than the wire itself.

Advertisement

Utility Knife
n/a
Can you name this electrician tool?
utility knife
A utility knife is a jack-of-all-trades tool on any jobsite. It can be used to scrape insulation or strip wire in a pinch, scrape away old paint or caulk, or even open tough packages.
reciprocating saw
level
tick tester

Advertisement

Voltage tester
Wiki commons
Can you name this electrician tool?
measuring tape
tick tester
Not sure if a receptacle or other device is "hot" or not? The very best way to find out is one that involves avoiding contact with the device using a tick tester. This tool looks like a simple pen, but it's really a non-contact voltage detector in disguise.
level
channel locks

Advertisement

Multimeter
Shutterstock
Can you name this electrician tool?
multimeter
A multimeter is an all-in-one tool that is an absolute must for any electrician. The device measures current, voltage and electric resistance, and may also be know as a voltmeter.
roto split
label maker
lockout kit

Advertisement

Level
shutterstock
Can you name this electrician tool?
hacksaw
level
Levels are useful for every tradesman, but many electricians focus specifically on torpedo levels, which are small enough to fit in a standard tool belt. A level ensures receptacle and switch plates are placed level on the wall.
utility knife
side cutting pliers

Advertisement

Flashlight
shutterstock
Can you name this electrician tool?
side cutting pliers
flashlight
Electricians are often called in to fix things when the lights go out -- or before power is even installed. On these projects, you'll need a flashlight or other light source so you can get the job done. To keep your hands free for work, a headlamp is also a good buy for many electricians.
drill
nut driver

Advertisement

Wire Terminal Crimper
n/a
Can you name this electrician tool?
fish tape
conduit reamer
Allen wrench
wire crimpers
Wire crimpers are the traditional tool used to permanently join two wires. While wire nuts have replaced crimping in many applications, a good pair of crimpers belongs in every electrical tool bag.

Advertisement

conduit bender
n/a
Can you name this electrician tool?
tick tester
fish tape
wire crimpers
conduit bender
Metal conduit keeps wire protected within walls, ceilings and other installations. Unfortunately, these rigid pipes can be difficult to fit into tight spaces, especially during renovation projects. A conduit bender puts a curve into these metal pipes so you can make them fit where you want to.

Advertisement

label maker
Wiki commons
Can you name this electrician tool?
safety glasses
wire crimpers
label maker
Have you ever opened an electrical panel and seen a bunch of blank labels next to the various breakers? Wiring can quickly become a huge confusing mess without labels, which are placed everywhere from junction boxes to conduits to panels. A label maker makes this an easy and neat job and makes things much easier for anyone who comes along in the future to access the electrical system.
linesman pliers

Advertisement

WD-40
n/a
Can you name this electrician tool?
nut driver
wire crimpers
cable lube
Pulling wires through conduit isn't always easy. Applying a bit of cable lube to the head of the wires before passing them through the conduit makes the job much easier, and helps prevent snags and blockages.
socket wrench

Advertisement

Can you name this electrician tool?
n/a
Can you name this electrician tool?
roto split
hole saw bit
When you're installing conduit in an existing building, there will come a point where you have to pass the conduit through a piece of wood or drywall. In these instances, a hole saw creates a clean and neat hole for the conduit without damaging the surrounding surface.
utility knife
side cutting pliers

Advertisement

Hammer Drill
Wiki commons
Can you name this electrician tool?
side cutting pliers
wire crimpers
hammer drill
When you're fastening objects to concrete or masonry, a regular drill just won't do. For these jobs, you'll need a hammer drill, which combines a hammering impact with a standard drill mechanism to easily attach things to tough materials.
threading tool

Advertisement

Socket Wrench
shutterstock
Can you name this electrician tool?
tapping tool
lockout kit
socket wrench
A socket wrench can be used to remove and install nuts and bolts. Thanks to its ratcheting action, it's quick and easy to use, and you don't have to keep moving and adjusting the wrench as you work on the nut or bolt.
tin snips

Advertisement

Stubby Screwdriver
Shutterstock
Can you name this electrician tool?
vise grip
soldering iron
hacksaw
stubby screwdriver
A stubby screwdriver might look silly, but it can save the day when you're working in tight spaces. It's the perfect tool for tightening and loosening screws anywhere that a standard screwdriver or drill just won't fit.

Advertisement

nut driver
Wiki commons
Can you name this electrician tool?
nut driver
A nut driver works just like a screwdriver, but it has a head designed to wrap around a nut rather than grasp a screw. These tools are perfect for low-torque applications where power tools might not be appropriate.
carpenter's square
threading tool
magnetic tray

Advertisement

Safety Glasses
shutterstock
Can you name this electrician tool?
hacksaw
tool bag
hammer
safety glasses
Anytime you're tempted to not wear your safety glasses on the jobsite, take a quick moment to google images of construction site eye injuries. The picture might turn your stomach, but they also might convince you that wearing safety glasses is an absolute necessity on the job.

Advertisement

Hard Hat
n/a
Can you name this electrician tool?
side cutting pliers
drill
hard hat
A hard hat is a no-brainer on the jobsite, especially for electricians, who are often working in tight ceiling spaces. Of course, any spot on a construction site could be a hazard thanks to falling objects or other potential disasters.
magnetic tray

Advertisement

stud finder
n/a
Can you name this electrician tool?
linesman pliers
stud finder
A stud finder is a surprisingly simple device that detects the locations of wall studs -- even those concealed behind drywall. Electricians can use this tool when hanging light fixtures, panel boxes and other devices.
drill
hammer

Advertisement

linesman pliers
Wiki commons
Can you name this electrician tool?
linesman pliers
Linesman pliers are a standard tool for electricians. These hand tools are used to grip, bend, cut, twist and otherwise manipulate wire. They can also be used to strip insulation in a pinch.
hammer
label maker
multimeter

Advertisement

Electrical Tape
Shutterstock
Can you name this electrician tool?
cable lube
measuring tape
Phillips screwdriver
electrical tape
Electrical tape is different from other types of tape in that it can be used for insulation. Generally, black tape is used for insulation only, while other colors indicate various voltages and phases.

Advertisement

Tool box
shutterstock
Can you name this electrician tool?
level
multimeter
Allen wrench
tool box
Nothing looks more unprofessional than an electrician who shows up without the right tools for the job. This means investing in a quality tool box as well as a tool belt to keep the items you need close at hand as you work.

Advertisement

Soldering Iron
Wiki commons
Can you name this electrician tool?
hammer
nut driver
soldering iron
A soldering iron is a heating tool that allows you to join multiple wires with a material called solder. While wire nuts are often used to join wires, some prefer to stick with the old-school method of wire joining using a soldering iron.
multimeter

Advertisement

Vise-Grip Pliers
YouTube
Can you name this electrician tool?
hammer
soldering iron
vise grip
A vise grip locks to a table or other flat surface. It can be used to hold conduit or other objects while you work. Vise grips serve as an extra hand when you need one on the jobsite.
carpenter's square

Advertisement

Socket Set
Shutterstock
Can you name this electrician tool?
vise grip
socket set
A socket set goes hand in hand with a socket wrench. It consists of a variety of socket attachments to accommodate nuts and bolts of various sizes.
carpenter's square
safety glasses

Advertisement

Tin Snips
Shutterstock
Can you name this electrician tool?
tin snips
Tin snips might not be the most commonly used tool for electricians, but they can come in handy at times. They are an ideal tool for snipping sheet metal, such as air handlers or ducts, as well as metal studs and track.
drill
insulated screwdriver bit holder
carpenter's square

Advertisement

Chalk Line
shutterstock
Can you name this electrician tool?
chalk line
A chalk line is a simple device that consists of a roll of string coated in chalk. When stretched out and snapped, it leaves behind a removable line to serve as a guide during installation. Chalk lines are useful for laying out receptacles, outlets and fixtures in even rows.
wire stripper
soldering iron
stud finder

Advertisement

Hacksaw
Wiki commons
Can you name this electrician tool?
hammer
drill
fish pole
hacksaw
A simple hacksaw belongs in every electrical tool box. This saw can be used to cut conduit and cable strut, plus countless other things you might run into while working.

Advertisement

You Got:
/38
Shutterstock